mrhyperlinkukplain Get a free Giffgaff Sim

Tweaking ESXi 5.0 – Adding un-supported hardware to VMware vSphere ESXi 5.0 – Adding a QLE-220 to ESXi 5.0

A continuation of this article – Tweaking ESXi 4.1U1 – Adding un-supported hardware to VMware vSphere ESXi 4.1 U1 – Adding a QLE-220 to ESXi 4.1 U1.

No official support for the Qlogic QLE-220 in ESXi 5.0, vSphere GUI client before tweak

No official support for the in , vSphere GUI client before tweak

Because I’m also now testing Production .0 (ESXi 5.0), and also need to connect the ESXi 5.0 servers to the SAN using the same Qlogic QLE-220 4GB cards. These are the PCI-E cards that fit in the MicroServer quite nicely. As these Qlogic cards were NOT supported in ESXi 4.1, it’s unlikely they are supported in ESXi 5.0, and they are NOT, and not included on the HCL (Hardware Compatibility List).

Again, trying to get ahead of the curve, it will not be long, before I’m asked the same question as before with ESXi 4.x.

“ESXi 5.0 does not “see my network interface card, or storage controller.”

“How do I add this mass storage controller, network interface card,  fibre channel HBA to ESXi?”

A.Andy’s Thoughts

It is my understanding, that rather than a single , which contains the Vendor and Device IDs of ESXi 4.x, the file has been broken down into likewise individual mapping files, /etc/vmware/driver.map.d reveals 60 individual map files which contain the Vendor Id and Device Ids similar to the original of ESXi 4.x.

ESXi 5.0  contents of /etc/vmware/driver.map.d

ESXi 5.0 contents of /etc/vmware/driver.map.d

The file I need to modify is the qla2xxx.map file, to add the Vendor ID and Device ID. I may also have to alter the pci.ids files as well, but it’s unlikely!

the console command lspci -v reveals the same vendor ID and device ID

console output of lspci -v on ESXi 5.0

console output of lspci -v on ESXi 5.0

When ESXi 5.0 boots up you can see the individual driver modules files being extracted from their tarbal archives and loaded into ramdrive memory. These tarballs contain the mapping PCI ID mapping file and also the drivers for the device. All that is required is to add your new qla2xxx.map file (modified mapping file) into the scsi-qla.v00 tarballed file.

B. Adding the device to the mapping file

I’ve completed this by, extracting the original contents, including sub directories, copying my new mapping file, and creating a new archive.

  1. cd tmp
  2. mkdir tweak
  3. cd tweak
  4. cp /bootbank/scsi-qla.v00 scsi-qla.tgz
  5. tar -xvf scsi-qla.tgz
  6. rm scsi-qla.tgz
  7. Update and tweak the qla2xxx.map file.
  8. Modifying the qla2xxx.map file to add additional Vendor and Device ID

    Modifying the qla2xxx.map file to add additional Vendor and Device ID

  9. tar -cvzf scsi-qla.tgz etc usr
  10. mv scsi-qla.tgz scsi-qla.v00
  11. cp scsi-qla.v00 /bootbank/scsi-qla.v00
  12. restart server.
Qlogic QLE-220 in ESXi 5.0, vSphere GUI client after tweak

Qlogic QLE-220 in ESXi 5.0, vSphere GUI client after tweak

Viola! An un-supported Qlogic QLE-220 added and working in ESXi 5.0.

Post to Twitter

Tags: , , , , , , , , , , ,